Most suppliers sell a chemical. We deliver a coagulation–flocculation system — PAC to destabilize, PAM to flocculate, and a ratio proven on your own water, from our own six plants.
Coagulation and flocculation are one process split across two chemicals. Buying them from two suppliers means two COAs, two lead times, and nobody owning the result.
Charge neutralization first, bridging second. We supply the ratio, not just the bags.
Send 500 ml. Our lab screens candidate grades and returns type, MW, charge and dose in 3 days.
Solid and liquid lines run in parallel — one order can ship powder PAM and IBC totes of PAC together.
We helped write China's drinking-water PAC standard. Compliance sits in the process, not a certificate on the wall.
Anionic · Cationic · Non-ionic · PAC 28% · PAC 29%
FOB Qingdao / Shanghai, CIF or DDP. 7–10 days for stocked grades; custom MW in 15–20 days.
Each family has a fixed set of grades. Tell us the separation problem and we match the grade — no 200-item list to guess from.
Mineral tailings, coal washing, EOR, high-turbidity clarification.
Sludge dewatering on belt press, centrifuge and screw press.
Acidic or low-charge systems where ionic PAM backfires.
Exactly two. A third would be a marketing story, not a product.
Starting points from our plant data, including the ×1.2 field factor for PAM. Bench estimate only — the jar test still decides.
Indicative values for typical surface water and municipal wastewater. High-salt, high-COD or oily systems need a jar test.
Basis: solid PAC as Al₂O₃ ≥28%; PAM doses carry the 1.2 field factor used in our proposals. Liquid PAC 10% converted on an equivalent-Al₂O₃ basis.
Drinking-water clarification, sewage treatment, sludge dewatering, reuse.
Polymer flooding, flowback clarification, oily sludge, high salinity.
Fine tailings settlement, coal fines recovery, water recycling.
Retention and drainage aids, white-water clarification, neutral sizing.
High-COD, high-colour decolorization plus biological sludge handling.
Juice and syrup clarification, sugar processing, high-organic effluent.
Buyers get burned by suppliers who imply certifications they don't have. Here is the exact list, including the gap.
Drafting unit — drinking-water PAC national standard. Signatory entity: Henan Huaquan Water-material General Factory.
Drafting unit — industrial PAC standard. Signatory entity: Henan Huaquan Water Treatment Co., Ltd.
Quality and environmental management systems, certificates available with numbers on request.
Third-party testing and pre-shipment inspection, report numbers issued per batch.
We do not hold NSF/ANSI 60. Our drinking-water grade meets GB 15892-2020, not the US standard. No US municipal drinking-water supply.
16-section SDS per grade prepared for US import requirements; TSCA statement supplied with each shipment.
25 kg (55 lb) bags, 1 t jumbo bags, 1.2 t IBC totes for liquid PAC.
HS 3906.90 / 2827.32. FOB Qingdao or Shanghai, CIF, DDP. T/T 30% + balance, or L/C at sight.
A Shanxi coal washing plant was running a blended competitor product at 61 g/t with unstable overflow. We switched them to anionic 20 M PAM at 42 g/t, keeping the existing PAC dose.
A four-step decision flow based on zeta potential, solids type and separation equipment — the same logic our engineers apply on jar tests.
Mixing energy, ageing of make-up solution, feed-point turbulence — and how to budget for it without over-ordering.
Pick the document — we email the PDF. One field, no phone call.
Free 500 g samples for jar testing. Trial orders start at 1 ton (40 × 25 kg bags on a pallet). Standard container loads are 20–25 tons; liquid PAC ships in 1.2 t IBC totes.
The charge of your solids decides it. Negatively charged mineral, coal and sand tailings take anionic PAM; organic sludge from municipal or biological treatment takes cationic PAM. Charge density and molecular weight are then fixed by a jar test, which we run free on your sample.
No. Our drinking-water PAC is produced to GB 15892-2020, the Chinese national standard. We do not hold NSF/ANSI 60 and we do not supply product into US municipal drinking-water plants that require it. For industrial wastewater, mining and process applications this certification is not applicable.
Batch COA, TDS, and a 16-section OSHA-format SDS, plus a TSCA statement for US imports. SGS or CCIC inspection reports can be arranged pre-shipment at cost.
T/T with 30% deposit and balance before shipment, or L/C at sight. FOB Qingdao / Shanghai, CIF, or DDP to major ports. Stocked grades 7–10 days after deposit; custom molecular weights 15–20 days.
Yes — both are produced in-house, so one order can combine powder PAM with PAC powder or IBC totes, under one COA chain and one bill of lading.